Translate

Saturday, September 26, 2015

Buildings Houses And Structures Part 2


Here are some images of some more HO 1/87 scale buildings of an old shed, an abandoned factory, and an old bi level house I think.

Tuesday, September 22, 2015

Buildings Houses And Structures Part 1

Here are some images of some 1/87 scale (HO) Buildings Houses and Structures.
A friend of mine gave some old HO models he built in his youthful days. Of course back in that time a lack of paint and a copious amount of glue was a prerequisite. Whether it needed it or not.
So I've taken it upon myself to rebuild and paint these tiny models as they were meant to be. Here are the first offerings. A Brewery, A Wind Pump, A Brick House and an Old Farm House. Of course these models are meant for model railroading. Whether or not I get into model railroading in the future remains to be seen. More to follow.

Saturday, September 19, 2015

Boeing F4B-4

Here are some images of Hasegawa's 1/32 scale Boeing F4B-4.

From Wikipedia"

The Boeing P-12/F4B was an American pursuit aircraft that was operated by the United States Army Air Corps and United States Navy.
 Boeing developed the aircraft as a private venture to replace the Boeing F3B and Boeing F2B with the United States Navy, the first flight of the P-12 took place on 25 June 1928. The new aircraft was smaller, lighter and more agile than the ones it replaced but still used the Wasp engine of the F3B. This resulted in a higher top speed and overall better performance. As result of Navy evaluation 27 were ordered as the F4B-1, later evaluation by the United States Army Air Corps resulted in orders with the designation P-12. Boeing supplied the USAAC with 366 P-12s between 1929 and 1932. Production of all variants totalled 586.

P-12s were flown by the 17th Pursuit Group (34th, 73rd, and 95th Pursuit Squadrons) at March Field, California, and the 20th Pursuit Group (55th, 77th and 79th Pursuit Squadrons) at Barksdale Field, Louisiana. Older P-12s were used by groups overseas: the 4th Composite Group (3rd Pursuit Squadron) in the Philippines, the 16th Pursuit Group (24th, 29th, 74th, and 79th Pursuit Squadrons) in the Canal Zone, and the 18th Pursuit Group (6th and 19th Pursuit Squadrons) in Hawaii.
The P-12 remained in service with first-line pursuit groups until replaced by Boeing P-26s in 1934–1935. Survivors were relegated to training duties until 1941, when most were grounded and assigned to mechanic's schools.

Thursday, September 17, 2015

Curtiss BF2C-1 Goshawk II

Here are some images of hasegawa's 1/32 scale Curtiss BF2C-1 Goshawk II.

From Wikipedia"
The Curtiss BF2C Goshawk (Model 67) was a United States 1930s naval biplane aircraft that saw limited success but was part of a long line of Hawk Series airplanes made by the Curtiss Aeroplane and Motor Company for the American military, and for export as the Model 68 Hawk III.

The United States Navy and Curtiss felt the F11C-2 possessed development potential. The Navy decided to procure a variant with retractable landing gear. This variant, which still had the F11C-2's classic "Hawk" wood wing with its flat-bottomed Clark Y airfoil, was designated XF11C-3 by the Navy and Model 67 by Curtiss. The main gear retraction system was inspired by the Grover Loening-designed system on the Grumman XFF-1 prototype, and was manually operated.
The XF11C-3 was delivered to the USN in May 1933, with a Wright R-1820-80 radial engine rated at 700 hp (520 kW). Trials revealed a 17 mph (27 km/h) increase in speed over the F11C-2, but the extra weight caused a decrease in maneuverability. The Navy felt the handling degradation was more than offset by the increase in speed. During testing the XF11C-3 had its wood wing replaced by the metal-structured, biconvex, NACA 2212 airfoil wing used in production and soon after was redesignated XBF2C-1 (Model 67A) in keeping with the new Bomber-Fighter category.
Twenty-seven BF2C-1 were ordered by the U.S. Navy, with a raised rear turtledeck, a semi-enclosed cockpit, and a metal-framed lower wing. It was armed with two .30 calibre Browning machine guns and three hardpoints for 500 lb (230 kg) of external stores. Delivered in October 1934, they were assigned to VB-5 on the aircraft carrier USS Ranger, but served only a few months before difficulties with the landing gear led to their withdrawal. In spite of its short service run many of the innovations developed for the Goshawk line found wide use in Navy aircraft for years to follow. They were the last Curtiss fighter accepted for service with the U.S. Navy.
The export version Model 68 Hawk III reverted to the classic wood/Clark Y wings and was powered by a 770 hp (570 kW) R-1820-F53. Chinese Hawk IIIs served as multi-purpose aircraft when combat operations against the Imperial Japanese Army and Navy Air Forces began in earnest in August 1937, and were considered the Nationalist Chinese Air Force's frontline fighter-pursuit aircraft along with their inventory of Hawk IIs, Boeing Model 281 "Peashooters" and Fiat CR.32s. These aircraft were used against both the Imperial Japanese Army and Navy Air Forces and both ground and naval targets with considerable success through the end of 1937, before being superseded by the better-armed and faster Polikarpov I-15 and I-16 fighters. In the summer of 1940, nine surviving Hawk-III fighters, the F11C exported to the Nationalist Chinese Air Force served as night fighters to defend the Chinese wartime capital Chongqing from Japanese night bombing runs with the 22nd Squadron of the 4th Group.
In early 1935, Thailand placed an order for 24 Curtiss Hawk IIIs at a cost of 63,900 Baht each, and a manufacturing license was also bought. The first 12 Hawk IIIs were shipped to Thailand in August and the remaining 12 arrived in late 1935, which were named Fighter Type 10. A total of 50 Hawk IIIs were locally built during 1937 and 1939. The type was used against the French in the Franco-Thai War and the Japanese invaders in December 1941, then relegated for use as trainers. Some of these aircraft were still active in 1949 and one airframe (KH-10) survives in the Royal Thai Air Force Museum.
The Model 79 Hawk IV demonstrator had a fully enclosed cockpit and a 790 hp (590 kW) R-1820-F56.

Sunday, September 13, 2015

1935 Morgan Three Wheeler

Here are some images of Minicraft's 1/16 scale 1935 Morgan Three Wheeler.

From Wikipedia"
H.F.S. Morgan's first car design was a single-seat three-wheeled runabout, which was fabricated for his personal use in 1909. Interest in his runabout led him to patent his design and begin production. While he initially showed single-seat and two-seat versions of his runabout at the 1911 Olympia Motor Exhibition, he was convinced at the exhibition that there would be greater demand for a two-seat model. The Morgan Motor Company was registered as a limited private company only in 1912 with "H.F.S." Morgan as managing director and his father, who had invested in his son's business, as its first chairman.
Morgan established its reputation via competition such as winning the 1913 Cyclecar Grand Prix at Amiens in France. This became the basis for the 'Grand Prix' model of 1913 to 1926, from which evolved the 'Aero', and 'Sports' models.
These models used air-cooled or liquid-cooled variations of motorcycle engines. The engine was placed ahead of the axis of the front wheels in a chassis made of steel tubes brazed into cast lugs.
The V-Twin models were not returned to production after World War II.
 The Morgan F-4 was introduced in 1933 at the Olympia Motor Cycle Show. The F-4 had a new pressed-steel chassis the four-cylinder Ford Sidevalve engine used in the Model Y, and a four seat body.The F-4 was supplemented by the two-seat F-2 in 1935 and the more sporting F Super, with cycle-type wings and louvred bonnet tops, in 1937. Production of the Ford-engined three-wheelers continued until 1952.

Thursday, September 10, 2015

SLC 200 Maiale Human Torpedo

Here are some images of Model Victoria's 1/35 scale SLC 200 Maiale Human Torpedo built for a client.
The base was created by yours truly.

From Wikipedia"

 Siluro a Lenta Corsa (SLC), also known as Maiale (pig), a low speed human torpedo. On December 3, 1941, the Sciré departed La Spezia carrying three Maiale to conduct what became the Raid on Alexandria (1941). At the island of Leros in the Aegean Sea, six Decima Flottiglia MAS crewmen came aboard, including Lieutenant Luigi Durand de la Penne. On December 18 Sciré released the manned torpedoes 1.3 miles from Alexandria commercial harbor, and they entered the harbor when the British opened the boom defence to let three of their destroyers pass. After many difficulties, de la Penne and his crewmate Emilio Bianchi successfully attached a limpet mine under HMS Valiant, but had to surface as they attempted to leave and were captured. They refused to answer when questioned and were detained in a compartment aboard Valiant. Fifteen minutes before the explosion, de la Penne asked to speak to the Valiant's captain and informed him of the imminent explosion but refused to give other information. He was returned to the compartment and neither he or Bianchi were injured by the detonation of the mine. The other four torpedo-riders were also captured, but their mines sank the Valiant, the battleship Queen Elizabeth, the Norwegian tanker Sagona and badly damaged the destroyer HMS Jervis. The two battleships sank in only a few feet of water and were subsequently re-floated. Nevertheless they were out of action for over a year.

Saturday, September 5, 2015

Junkers Ju87 R (Stuka)

Here are some images of Trumpeter's 1/32 scale Junkers Ju87 R (Stuka) Dive Bomber.

From Wikipedia"

 A long range version of the Ju 87B was also built, known as the Ju 87R, the letter allegedly being an abbreviation for Reichweite, "(operational) range". They were primarily intended for anti-shipping missions. The Ju 87R had a B-series airframe with an additional oil tank and fuel lines to the outer wing stations to permit the use of two 300 L (79.25 US gal) standardised capacity under-wing drop tanks, used by a wide variety of Luftwaffe aircraft through most of the war. This increased fuel capacity to 1,080 litres (500 L in main fuel tank of which 480 L where usable + 600 L from drop tanks). To prevent overload conditions, bomb carrying ability was often restricted to a single 250 kg (550 lb) bomb if the aircraft was fully loaded with fuel.
The Ju 87 R-1 had a B-1 airframe with the exception of a modification in the fuselage which enabled an additional oil tank. This was installed to feed the engine due to the increase in range after the addition of the extra fuel tanks.
The Ju 87 R-2 had the same airframe as the B-2, and strengthened to ensure it could withstand dives of 600 km/h (370 mph). The Jumo 211D in-line engine was installed, replacing the R-1s Jumo 211A. Due to an increase in overall weight by some 700 kg (1,500 lb), the Ju 87 R-2 was 30 km/h (19 mph) slower than the Ju 87 B-1 and had a lower service ceiling. The Ju 87 R-2 had an increased range advantage of 360 km (220 mi). The R-3 and R-4 were the last R variants developed. Only a few were built. The R-3 was an experimental tug for gliders and had an expanded radio system so the crew could communicate with the glider crew by way of the tow rope. The R-4 differed from the R-2 in the Jumo 211J powerplant.
Total production amounted to 972 Ju 87R (105 R-1, 472 R-2, 144 R-4), all built by Weserflug. The last Ju 87R rolled off the production lines in October 1941.