Airco D.H.2

Here are some images of Smer's 1/48 scale Airco D.H.2. From Wikipedia "The Airco DH.2 was a single-seat biplane "pusher" aircraft which operated as a fighter during the First World War. It was the second pusher design by Geoffrey de Havilland for Airco, based on his earlier DH.1 two-seater. The DH.2 was the first effectively armed British single-seat fighter and enabled Royal Flying Corps (RFC) pilots to counter the "Fokker Scourge" that had given the Germans the advantage in the air in late 1915. Until the British developed an interrupter gear to match the German system, pushers such as the DH.2 and the F.E.2b carried the burden of fighting and escort duties.

Junkers D.I

Here are some images of Roden's 1/48 scale Junkers D.I. From Wikipedia "

The Junkers D.I (factory designation J 9) was a fighter aircraft produced in Germany late in World War I, significant for becoming the first all-metal fighter to enter service. The prototype, a private venture by Junkers designated the J 7, first flew on 17 September 1917. Demonstrated to the Idflieg early the following year, it proved impressive enough to result in an order for three additional aircraft for trials. However, the changes made by Junkers were significant enough for the firm to re designate the next example the J 9, which was supplied to the Idflieg instead of the three J 7s ordered.

During tests, the J 9 was felt to lack the maneuverability necessary for a front-line fighter, but was judged fit for a naval fighter, and a batch of 12 was ordered. These were to have been supplied to a naval unit by September 1918, but instead equipped the same unit redeployed to the Eastern Front after the Armistice. One survives in a French Museum.

TIE Fighter

Here are some images of Fine Molds 1/72 scale Siener Fleet Systems TIE/Ln Space Superiority Starfighter. From Wikipedia "TIE fighters are fictional starfighters in the Star Wars universe. Propelled by Twin Ion Engines (hence the TIE acronym), TIE fighters are depicted as fast, fragile starfighters produced by Sienar Fleet Systems for the Galactic Empire. TIE fighters and other TIE craft appear in the original Star Wars trilogy — Episode IV: A New Hope (1977), Episode V: The Empire Strikes Back (1980), and Episode VI: Return of the Jedi (1983) — and throughout the Star Wars Expanded Universe.

Thunderstreak

Here are some images of Revell's 1/48 scale Republic F 84 Thunderstreak. From Wikipedia "

In 1949, Republic created a swept wing version of the F-84 hoping to bring performance to the F-86 level. The last production F-84E was fitted with a swept tail, a new wing with 38.5 degrees of leading edge sweep and 3.5 degrees of anhedral, and a J35-A-25 engine producing 5,300 pound-force (23.58 kN) of thrust. The aircraft was designated XF-96A. It flew on 3 June 1950 with Otto P. Haas at the controls. Although the airplane was capable of 602 knots (693 mph, 1,115 km/h), the performance gain over the F-84E was considered minor.Nonetheless, it was ordered into production in July 1950 as the F-84F Thunderstreak. The F-84 designation was retained because the fighter was expected to be a low-cost improvement of the straight-wing Thunderjet with over 55 percent commonality in tooling.

In the meantime, the USAF, hoping for improved high-altitude performance from a more powerful engine, arranged for the British Armstrong Siddeley Sapphire turbojet engine to be built in the United States as the Wright J65. To accommodate the larger engine, YF-84Fs with a British-built Sapphire as well as production F-84Fs with the J65 had a vertically stretched fuselage, with the air intake attaining an oval cross-section. Production delays with the F-84F forced USAF to order a number of straight-wing F-84Gs as an interim measure.

Production quickly ran into problems. Although tooling commonality with the Thunderjet was supposed to be 55 percent, in reality only 15 percent of tools could be reused.To make matters worse, the F-84F utilized press-forged wing spars and ribs. At the time, only three presses in the United States could manufacture these, and priority was given to the B-47 Stratojet bomber over the F-84.The YJ65-W-1 engine was considered obsolete and the improved J65-W-3 did not become available until 1954. When the first production F-84F finally flew on 22 November 1952, it differed from the service test aircraft. It had a different canopy which opened up and back instead of sliding to the rear, as well as airbrakes on the sides of the fuselage instead of the bottom of the aircraft.The aircraft was considered not ready for operational deployment due to control and stability problems. Since early aircraft suffered from accelerated stall pitch-up, F-84F-25-RE introduced an all-moving tailplane. A number of aircraft were also retrofitted with spoilers for improved high-speed control. As a result, the F-84F was not declared operational until 12 May 1954.

Rhinoceros

Here are some images plus a composite of Dragon Model's 1/35 scale Nashorn. From Wikipedia "Nashorn (German "rhinoceros", pronounced Nahz-horn, not Nash-orn), initially known as Hornisse (German "hornet") was a German tank destroyer of World War II. It was developed as an interim solution in 1942 and was armed with the outstanding PaK 43 anti-tank gun. Though only lightly armoured and with a high profile, it stayed in service until the end of the war and proved to be a quite successful tank destroyer.

Ambulance

Here are some images of Master Box's 1/35 scale Panzer 1 Ausf Ambulance. Huge and already irreplaceable losses of vehicles, suffered by the Wehrmacht during the first year of Operation Barbarossa forced the German high command to use vehicles that were not quite suitable in solving their transportation problems. Thus the use of disarmed light Pz I Ausf Panzer vehicles were used as ambulances. This can be used as an example of the necessity to filling the requirement of given transport deficiencies.

Stuart

Here are some images of Tamiya's 1/35 scale M3 Stuart light tank. From Wikipedia "The M3 Stuart, formally Light Tank M3, was an American light tank of World War II. It was used by British and Commonwealth forces prior to the entry of the USA into the war, and thereafter by US and Allied forces until the end of the war. The name General Stuart or Stuart given by the British comes from the American Civil War General J.E.B. Stuart and was used for both the M3 and the derivative M5 Light Tank; in British service it also had the unofficial nickname of Honey (named when a tank driver remarked "She's a honey").To the United States Army the tanks were officially known only as "Light Tank M3" and "Light Tank M5".

Leopard 2

Here are some images of Tamiya's 1/35 scale Leopard 2 A6. From Wikipedia "

The Leopard 2 is a German main battle tank (Kampfpanzer) developed by Krauss-Maffei in the early 1970s and first entering service in 1979. The Leopard 2 replaced the earlier Leopard 1 as the main battle tank of the German Army. Various versions have served in the armed forces of Germany and twelve other European countries, as well as several non-European nations. More than 3,480 Leopard 2s have been manufactured. The Leopard 2 first saw combat in Kosovo with the German Army and has also seen action in Afghanistan with the Danish and Canadian ISAF forces.

There are two main development batches of the tank, the original models up to Leopard 2A4 which have vertically-faced turret armour, and the "improved" batch, namely the Leopard 2A5 and newer versions, which have angled arrow-shaped turret appliqué armour together with a number of other improvements. All models feature digital fire control systems with laser rangefinders, a fully stabilized main gun and coaxial machine gun, and advanced night vision and sighting equipment (first vehicles used a low-light level TV system or LLLTV; thermal imaging was introduced later on). The tank has the ability to engage moving targets while moving over rough terrain.

Includes the addition of the Rheinmetall 120 mm L55 smoothbore gun and a number of other changes. All German tank battalions of the "crisis intervention forces" are equipped with the A6, as are all Dutch operational units. Canada has also purchased 40 Leopard 2A6s from the Netherlands. These were delivered in 2007.

The Leopard 2A6M is a version of the 2A6 with enhanced mine protection under the chassis, and a number of internal enhancements to improve crew survivability. Canada has borrowed 20 A6Ms from Germany for deployment to Afghanistan in late summer 2007. The new tanks all have turret electric drive.

Deutscher Panzerspähwagen

Here are some images of Tamiya's 1/35 scale Sd Kfz 223 light armored reconnaissance vehicle. From Wikipedia "

The Leichter Panzerspähwagen (German: roughly "Light Armoured Reconnaissance Vehicle") were a series of light four-wheel drive armoured cars produced by Nazi Germany from 1935 to 1944.

They were developed by Eisenwerk Weserhütte of Bad Oeynhausen. Chassis were built by Auto Union in Zwickau and assembled by F. Schichau of Elbing and Maschinenfabrik Niedersachsen in Hanover-Linden.

It used the standard sPkw I Horch 801 (heavy car) chassis with an angled armoured body and turret.

The rear mounted engine was a 67 kW (90 hp) Horch 3.5 petrol engine, giving it a road speed of 80 km/h (50 mph) and a cross-country speed of 40 km/h (25 mph). It had a maximum range of 300 km (186 mi).

Used by the reconnaissance battalions (Aufklärungs-Abteilung) of the Panzer divisions, the type performed well enough in countries with good road networks, like those in Western Europe. However, on the Eastern Front and North Africa, this class of vehicle was hampered by its relatively poor off-road performance. In those theaters, it gradually found itself replaced in the reconnaissance role by the Sdkfz 250 half-track. The Sdkfz 250/9 was the Sdkfz 250 with the same turret as the Sdfkz 222.

The Sdkfz 222 was examined by Soviet designers before they created the similar BA-64 light armoured car.

Front and sides were made of 8 mm (0.3 in) steel; thinner 5 mm (0.2 in) plates protected the top, rear, and bottom. Cast vision ports later replaced ports cut into the armour. The open topped turret was fitted with wire mesh anti-grenade screens.

Deutscher Panzerspähwagen

A radio car version, armed like the 221 with a 7.92 mm MG34 machine gun. Included additional radio equipment, and had a large "bed-frame" antenna over the vehicle. Over 500 of the SdKfz 223 were produced.

Fiat 3000

Here are some images of Tauro Model's 1/35 scale Fiat 3000 mod. 21 Ia Tank. From Wikipedia "

The Fiat 3000, whose design was based on that of the French Renault FT-17, was the first tank to be produced in series in Italy. It was to be the standard tank of the emerging Italian armored units in World War I.

Although 1400 units were ordered, with deliveries to begin in May 1919, the end of the war caused the original order to be cancelled and only 100 were delivered. The first Fiat 3000s entered service in 1921 and were officially designated as the carro d'assalto Fiat 3000, Mod. 21. (Fiat 3000 assault tank, Model 21). Tests of the Model 21 revealed that the armament, consisting of two 6.5mm machine guns, was inadequate, and adoption of a 37mm gun as main armament was urged.

The up-gunned version of the 3000, armed with a 37/40 gun, was tested in 1929 and was officially adopted in 1930 with the designation of carro d'assalto Fiat 3000, Mod. 30. The Model 30, in addition to its improved armament, also differed from the Model 21 in that it had an improved engine developing more power, its suspension was improved, the engine compartment had a different silhouette, and external stores were stowed differently. Some Model 30s were also produced with two 6.5mm machine guns as main armament, as on the Model 21, in lieu of the 37mm gun. A limited number of Model 21 vehicles were exported to Albania, Latvia and Abyssinia (Ethiopia) prior to 1930.

The designations of these tanks were changed prior to the outbreak of World War II, in accordance with the identification system that was adopted throughout the war by the Italians. The Model 21 was redesignated the L.5/21, and the Model 30 was redesignated the L.5/30.The Fiat 3000 (Model 21) was first used in action in February 1926 in Libya, and subsequently also saw action against the Ethiopians in 1935. The Italians did not employ any of these tanks in Spain during the Spanish Civil War, however. With Italy's entry into World War II in June 1940, a limited number of Fiat 3000s still in service with the Italian Army were employed operationally on the Greek-Albanian front. They were also among the last Italian tanks to oppose the Allies, as in July 1943, when the Allies landed in Sicily, two Italian tank companies on the island were still equipped with the 3000. One company was dug in and their vehicles were used as fixed fortifications, while the other company was used in a mobile role, with few of the tanks surviving the Allied drive.