Here are some images of Dragon/Bronco Models 1/350 scale U.S.S. Independence LCS-2.
My main complaint about this model is that they failed to emulate the panel work that one sees all over the real ship and I wasn't able to find a satisfactory way of recreating that. Oh well.
USS Independence (LCS-2) is the lead ship for the Independence class of littoral combat ships. She will be the sixth ship of the United States Navy to be named for the concept of independence. The design was produced by the General Dynamics consortium for the Navy's LCS program, and competes with the Lockheed Martin-designed Freedom class.
Independence is intended as a small assault transport that can take on various capabilities with the installation of mission modules. The ship is a trimaran design that can make more than 40 knots (74 km/h; 46 mph), and was delivered to the Navy at the end of 2009.
The design for Independence (LCS 2) is based on a high-speed trimaran (Benchijigua Express) hull built by Austal (Henderson, Australia). The 418-foot (127-meter) surface combatant design requires a crew of 40 sailors. Although the trimaran hull increases the total surface area, it is still able to reach sustainable speeds of about 50 knots (60 mph; 90 km/h) with a range of 10,000 nautical miles (19,000 km).
With 11,000 cubic meters of payload volume, it was designed with enough payload and volume to carry out one mission with a separate mission module in reserve, allowing the ship to do multiple missions without having to be refitted. The flight deck, 1,030 m2 (11,100 sq ft), can support the operation of two SH-60 Seahawk helicopters, multiple UAVs, or one CH-53 Sea Stallion-class helicopter. The trimaran hull will allow flight operations up to sea state 5.
The Independence carries a default armament for self-defense, and command and control. However unlike traditional fighting ships with fixed armament such as guns and missiles, tailored mission modules can be configured for one mission package at a time. Modules may consist of manned aircraft, unmanned vehicles, off-board sensors, or mission-manning detachments.
The interior volume and payload is greater than some destroyers and is sufficient to serve as a high-speed transport and maneuver platform. The mission bay is 15,200 square feet (1,410 m2), and takes up most of the deck below the hangar and flight deck.
In addition to cargo or container-sized mission modules, the bay can carry four lanes of multiple Strykers, armored Humvees, and their associated troops. An elevator allows air transport of packages the size of a 20-foot-long (6.1 m) shipping container that can be moved into the mission bay while at sea. A side access ramp allows for vehicle roll-on/roll-off loading to a dock and allows the ship to transport the Expeditionary Fighting Vehicle.
The Independence also has an integrated LOS Mast, Sea Giraffe 3D Radar and SeaStar Safire FLIR. Side and forward surfaces are angled for reduced radar profile. In addition, H-60 series helicopters provide airlift, rescue, anti-submarine, radar picket and anti-ship capabilities with torpedoes and missiles.
The Raytheon Evolved SeaRAM missile defense system is installed on the hangar roof. The SeaRAM combines the sensors of the Phalanx 1B close-in weapon system with an 11-missile launcher for the Rolling Airframe Missile (RAM), creating an autonomous system.
Independence has an Interior Communications Center that can be curtained off from the rest of bridge instead of the heavily protected Combat Information Center found on Navy warships.Austal claims that the Independence will use a third less fuel than Freedom, but the Congressional Budget Office found that fuel would account for 18 percent or less of the total lifetime cost of Freedom. While it was unable to judge the fuel usage of Independence, the higher purchase price of Independence would dominate its lifetime costs.